http://www.yeerprotective.com/disposable-coveralls/ 銆怭roduct Information銆?/strong> 1.Product name: disposable one-piece isolation suit (compression clause) 2.Product packaging: 1 set/bag 3.Scope of application: Disposable one-piece isolation clothing is widely used in clean workshops in electronics, pharmaceuticals, food, bioengineering, optics, aerospace, aviation, color tube, semiconductor, precision machinery, plastics, painting, hospitals, environmental protection and other industries. There are many colors and specifications suitable for different anti-static or clean environments. 4.The main function: the disposable one-piece isolation clothing is to isolate germs and prevent infection, breathe and moisture, can block the penetration of fine dust and liquid, and at the same time allow water vapor to leak; the clothing itself does not generate dust, stick to dust, and block Good performance, high density, high strength, can effectively sterilize and inhibit bacteria. 5.Product fabric: 35 grams of non-woven fabric covered with PE breathable and moisture permeable membrane fabric, weighing 65 grams per square gram, and pressed with blue tape. 6.Model/Specification: One-piece type (S/M/L/XL/XXL/XXXL) 銆怭roduct performance銆?/strong> 1銆乀he appearance should conform to the following table: Indexrequirements ColorThe color of the raw materials of each isolation garment is the same without obvious color difference StainsThe appearance of the isolation gown should be dry, clean, free from mildew and stains DeformitiesAdhesion, cracks, holes and other defects are not allowed on the surface of the isolation gown ThreadThere can be no thread longer than 5mm on the surface Sizeaccording to Table 1 Table 1 Specification model 锛坈m锛?/strong> SizelengthBustSleevelength CuffsFoot S168120841824 M173125861824 L178130901824 XL183135931824 XXL188140961824 XXXL193145991824 Allowable error卤2卤2卤2卤2卤2 2. Water resistance: The hydrostatic pressure of key parts should not be lower than 1.67 KPA (17 cmH2O). 3. Surface moisture resistance: the water level of the outer side should not be lower than level 3. 4. Breaking strength: The breaking strength of materials at key parts should not be less than 45N. 5. Elongation at break: The elongation at break of materials at key parts should not be less than 15%. 6. Elastic band: no gap or broken wire, it can rebound after stretching. 銆怭recautions銆?/strong> 1. Please check whether the packaging is intact before use, and confirm the packaging mark, production date, and expiration date. Use within the expiration date, if the packaging is damaged, and it is forbidden to use it. 2. Before taking off the protective gloves, try to avoid touching the outer surface of the isolation gown. After taking off the gloves, try to touch the inner surface of the isolation gown. Inside, to prevent pollutants from contacting the human body and the environment, the protective equipment taken off should be treated in a centralized manner to avoid expanding pollution in the process. 3. This product should be used by professionals; non-professionals should not use this product to avoid accidents. 4. This product is limited to one-time use and is destroyed after use.Disposable Coveralls website:http://www.yeerprotective.com/disposable-coveralls/